SWP calculator: how long your money lasts
Take a fixed amount every month from a lump sum and see what is left. The return is your assumption.
How we calculate this
Monthly rate = (1 + yearly return)^(1/12) − 1. Each month the balance grows, then the withdrawal is paid (or the other way round for start of month). If the money can't cover a withdrawal, the last payment is what is left, and the tool shows that month. Level withdrawal that lasts exactly the period = P × i ÷ (1 − (1 + i)^−n). Withdrawal that keeps the starting sum = P × i.
Calculation version 0.3 / RULES 0.17.
Related: SIP calculator · Lumpsum calculator · FD calculator · Post Office RD · NPS calculator · EPF calculator · Retirement calculator · RD calculator · Compound interest
How to read your SWP result
An SWP (systematic withdrawal plan) means you take a fixed amount out of your savings at regular times, usually every month. People often use it with mutual funds: the fund sells some of your units to pay you, and the rest stays invested. This tool shows how long a monthly withdrawal could last if the money left behind earned one steady yearly return. The return is your own assumption, not a promise. Real returns go up and down, and they can fall below zero.
What the numbers mean
Balance left is what would be left after your last withdrawal. Total withdrawn adds up every payment you took out.
Lasts the whole period? says “Yes”, or “No” with the month the money runs out. In that month you get only what is left, and the payments stop.
A line under the results helps you plan:
- Level monthly withdrawal that lasts exactly the period: the same amount each month that would bring the balance to exactly ₹0 at the end of your period.
- Without touching the starting sum: a withdrawal equal to the growth alone. Take this much each month and, at a steady return, you end with the amount you started with.
Both amounts assume a level withdrawal at the end of each month, with no yearly increase.
The table shows each year: the total withdrawn so far and the balance at the end of that year.
Yearly increase raises your withdrawal once every 12 months, for example to keep up with rising prices. With 5%, ₹8,000 a month becomes ₹8,400 in year 2. You can leave it empty; it then counts as no increase.
Start or end of month: at the end (the default), the month’s growth is added first and then the withdrawal goes out. At the start, the money leaves first, so it misses that month’s growth. The start option gives a slightly lower result.
The formula in plain words
The yearly return you type is an effective yearly figure: the growth over a full year, with growth on earlier growth included. We turn it into a monthly rate that gives exactly that yearly result over 12 months: monthly rate = (1 + yearly rate)^(1/12) − 1. So 8% a year becomes about 0.643% a month, not 8 ÷ 12 = 0.667%.
Then the tool walks through the plan one month at a time. With withdrawals at the end of the month, last month’s balance grows by the monthly rate and then the withdrawal comes out. With withdrawals at the start, the withdrawal comes out first and the rest grows.
The level amount is starting sum × monthly rate ÷ (1 − (1 + monthly rate)^−months). The amount that keeps your starting sum is starting sum × monthly rate.
Worked example
A fictional plan: ₹10,00,000 at the start, ₹8,000 taken out at the end of each month for 120 months (10 years), an assumed 8% a year, no yearly increase.
| Result | Value |
|---|---|
| Total withdrawn | ₹9,60,000 |
| Balance left | ₹7,17,931 |
| Level withdrawal that lasts 120 months | ₹11,986 a month |
| Without touching ₹10,00,000 | ₹6,434 a month |
You take out ₹9,60,000 and still have ₹7,17,931 left, because the balance keeps earning while you withdraw. But ₹8,000 is more than the ₹6,434 that the starting sum earns in a month, so the balance slowly falls.
Test a longer period and a lower return
Keep the same ₹8,000 a month but stretch the period to 50 years (600 months). At 8%, the money runs out in month 255 (year 22, month 3), after ₹20,34,410 paid out in total. Raise the withdrawal to ₹10,000 and it runs out in month 161 (year 14, month 5).
Now go back to 10 years and lower the return to 6%. About ₹4,91,060 would be left instead of ₹7,17,931. Try a low and a middle return before you plan around any figure.
What this tool doesn’t do
It uses one return for every month, and real markets don’t move like that. A few bad years early on, while you are taking money out, can leave much less than the steady figure shows, even if the average return over the whole period is the same.
The result is before tax, fund charges and exit loads (a fee some funds charge if you sell early). It doesn’t work out tax on what you withdraw. It doesn’t pick a fund or tell you what return to expect.
The starting amount, withdrawal, return and period are all required. If one is empty or out of range, the tool asks you to fix it and shows no result. It never treats a missing return as 0%. Your amounts stay on your device.
Sources: no official rule applies. The results come from the formulas on this page, calculated by Paisavy.
Read next
- SIP calculator (build up the amount first)
- Lumpsum calculator
- Retirement calculator
- SCSS calculator and Post Office MIS calculator (regular income at a fixed government rate)
- Starting an emergency fund with a small amount
Frequently asked questions
What is an SWP?
An SWP (systematic withdrawal plan) lets you take a fixed amount out of an investment at regular times, usually every month. With a mutual fund, the fund sells some of your units to pay you. The rest stays invested, so its value can rise or fall. Our calculator shows how long a withdrawal could last at a return you choose.
How long will my money last with a monthly SWP?
It depends on the amount, the withdrawal and the return. In our fictional example, ₹10,00,000 with ₹8,000 taken out each month at an assumed 8% leaves ₹7,17,931 after 10 years. Over 50 years, the same plan runs out in month 255. At ₹10,000 a month it runs out in month 161. Enter your own numbers to see your month.
How much can I withdraw each month without running out in 20 years?
The calculator shows a level amount that lasts exactly your period. For ₹10,00,000 at an assumed 8% a year, taken at the end of each month, that is about ₹8,192 for 20 years and ₹11,986 for 10 years. To keep the starting ₹10,00,000 untouched at a steady 8%, the amount is ₹6,434.
What return should I enter in an SWP calculator?
Use your own assumption. We don't suggest a figure, and no one can promise one for a market-linked investment. Try a low and a middle return. In our example, ₹8,000 a month from ₹10,00,000 leaves ₹7,17,931 after 10 years at 8%, but about ₹4,91,060 at 6%. An empty return field is never treated as 0%.
Does the SWP result include tax and charges?
No. The result is before tax, fund charges and exit loads (a fee some funds take if you sell early). Tax on what you withdraw depends on the rules for your investment, and this calculator doesn't work it out. Check the current rules on incometax.gov.in or with a tax professional before you plan around a figure.
SWP or a fixed-income scheme like SCSS or Post Office MIS?
They work differently. For SCSS and Post Office MIS the government fixes the rate: 8.2% and 7.4% a year for accounts opened from 1 Oct to 31 Dec 2026. A mutual fund SWP has no fixed rate, so its value can fall. SCSS is for people aged 60 or above and some retirees. Compare them with our SCSS and MIS calculators; we don't recommend either.
